Zephyrhills Cabinet Refacing logoZephyrhills Cabinet RefacingZephyrhills, FL
Menu
cabinet refacing in Zephyrhills, FL

Zephyrhills Cabinet Refacing

Cabinet Refacing in Zephyrhills, FL

Cabinet refacing in Zephyrhills, FL replaces doors, drawer fronts, and box veneer without a full gut job. Free estimates, honest timelines.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Zephyrhills and nearby communities.

Cabinet refacing means the boxes stay, the doors and surfaces change. New veneer skins go over the existing cabinet frames, new doors and drawer fronts get hung, and hardware gets swapped. The kitchen keeps its layout and its plumbing hookups. It just stops looking tired.

Zephyrhills Cabinet Refacing handles this work across Pasco County, where housing stock runs from older single-family builds with solid wood boxes to newer construction with particleboard cores. Box condition decides what's possible before anything else gets picked out. A quick on-site check tells you which path fits your kitchen.

What's included

What's included with Cabinet Refacing

Typically included

  • Box inspection for structural soundness before any material gets ordered
  • New veneer applied to exposed box faces and end panels
  • New doors and matching drawer fronts, hung and aligned
  • Hardware swap — hinges, pulls, knobs

Optional

  • Soft-close hinge upgrade on all doors and drawers
  • Crown molding added above the cabinet run
  • Pull-out trays or organizers inside existing boxes

Customer prep

  • Clear counters and empty cabinet contents before the crew arrives
  • Confirm door style and finish selections ahead of the install date

How it works

How our Cabinet Refacing process works

  1. Cabinet Assessment photo
    Step 1

    Cabinet Assessment

    Existing cabinet boxes are inspected for structural soundness before refacing begins.

  2. Design Consultation photo
    Step 2

    Design Consultation

    Clients review finish and style samples to plan the new cabinet appearance.

  3. Box Preparation photo
    Step 3

    Box Preparation

    Surfaces are cleaned and lightly sanded to help new materials adhere properly.

  4. Veneer Application photo
    Step 4

    Veneer Application

    Matching veneer is applied to exposed cabinet surfaces for a smooth finish.

  5. New Door Fitting photo
    Step 5

    New Door Fitting

    Replacement doors and drawer fronts are installed to complete the updated look.

  6. Quality Check photo
    Step 6

    Quality Check

    Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.

Materials

Materials and methods for Cabinet Refacing

Material choice matters more here than in a lot of other trades, since Florida humidity works against weak bonds over time.

  • Rigid Thermofoil photo

    Rigid Thermofoil

    A wrapped foil finish gives a consistent surface that holds up better than painted wood in a humid Pasco County kitchen.

  • Wood Veneer photo

    Wood Veneer

    Real wood grain over existing boxes, a good fit for older Zephyrhills homes with solid wood cabinets underneath.

  • Adhesive Bonding Agents photo

    Adhesive Bonding Agents

    The bond is the weak point in Florida refacing jobs, so contact adhesives rated for humidity swings matter here.

  • Matching Drawer Fronts photo

    Matching Drawer Fronts

    Fronts are built to the same specs as new doors so the whole kitchen reads as one finish, not a patch job.

  • Edge Banding photo

    Edge Banding

    Covers raw panel edges, which is where moisture usually gets in first on older boxes.

  • Cabinet Hardware Sets photo

    Cabinet Hardware Sets

    Coordinated hinges and pulls finish the look and hold up to daily use better than mismatched leftovers.

Cost

What does cabinet refacing cost in Zephyrhills?

Costs swing mostly on door material and box condition. These are ballpark ranges, not a quote. Ask for a free estimate with a real door count before you budget off a number you saw online.

Project typeTypical rangeWhat’s included
Entry-level refacing$3,000–$6,000laminate doors and basic hardware on boxes in good shape.
Mid-range refacing$6,000–$12,000wood veneer or solid wood doors with soft-close hardware.
Full kitchen, higher-end$12,000–$20,000+custom doors, box repair, and crown molding.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and codes for Cabinet Refacing

Check with Pasco County or your city building office before starting. Rules vary by jurisdiction.

Typically needs a permitOften no permit
Changing the kitchen layout or moving cabinet runsDoor and drawer front replacement
Adding a new island with plumbing or electricalVeneer application over existing boxes
Structural box replacement beyond refacing scopeHardware upgrades and soft-close hinge installs

DIY vs pro

DIY vs hiring a pro for Cabinet Refacing

DIYHire a pro
Swapping a single hinge or pullMatching veneer seams across multiple boxes
Touching up a small chip with matching paintBoring new hinge holes for soft-close hardware
Cleaning and conditioning existing wood doorsAssessing whether particleboard boxes can take refacing at all

FAQs

Cabinet Refacing FAQs

What's the difference between refacing and just painting cabinets?

Painting changes color only, on the existing doors. Refacing replaces the doors and drawer fronts outright and skins the boxes, so you get a new door profile and new hardware, not just a new coat.

Can you match new doors to my existing cabinet boxes and countertops?

Yes. Door samples get checked against your counters and box color during the design visit, before anything is ordered.

How do I know if my cabinets are solid wood or particleboard under the veneer?

A quick tap test and a look at the box edges usually tells us. Older Pasco County homes often have solid wood boxes. Newer builds lean particleboard with a laminate skin.

How much does it cost to redo cabinets?

Most Zephyrhills refacing jobs land between $3,000 and $12,000, depending on door material and how many cabinets are involved.

Is DIY Cabinet Refacing a good idea?

For a full kitchen, no. Box prep, veneer alignment, and hinge boring need practice. A single door swap is fine to try yourself.

Next step

Get a Cabinet Refacing estimate in Zephyrhills

Call (656) 261-8123 or request a free estimate through the contact form. Related work: Cabinet Door Replacement. Back to Home.

Ask about Cabinet Refacing

Tell us about the project and how to reach you.

Call (656) 261-8123